China factory Double Linear Bearings Motion CZPT near me factory

Product Description

 

Product Description

Description: Product name: Cylinear linear rail and bearings

1,Intruduction

ERSK linear rail linear CZPT rail linear CZPT slide block TBR SBR

Linear CZPT Slide Block TBR SBR series
1. Circular linear CZPT TBR16, 20, 25,30; SBR 50

2. Material: C45 # , Gcr15, Aluminum

3. ISO9001:2008 Certificate

4. High quality–Long life use

5. Manufactory with large stocks–Cheap Price and Prompt delivery

6. We can change the length of shaft and CZPT according to your requirements.

7. We can machine end round linear CZPT by your drawings.

8. Trading exporter–6 years export experience (linear rail)

 

2,Feature at a glance

SBR series linear block and linear shaft supprt

the linear bearing inner dia from 10mm to 50mm,

the linear shaft dia is the same as linear bearings,

the linear block case have standard SBR-S series:

SBR10UU, SBR12UU, SBR13UU, SBR16UU,SBR20UU,

SBR25UU,SBR30UU,SBR40UU,SBR50UU

have the over-length block SBR-L series:SBR10LUU,

SBR12LUU,SBR13LUU,SBR16LUU,SBR20LUU,SBR25LUU,

SBR30LUU,SBR40LUU,SBR50LUU

Look at the left picture, you could understand well

TBR series linear block and linear shaft supprt

the linear bearing inner dia from 16mm to 30mm, the linear shaft dia is the same as linear bearings

The linear block case have standard TBR-S series:TBR16UU,TBR20UU,TBR25UU,TBR30UU

Have the over-length block TBR-L series:TBR16LUU, TBR20LUU,TBR25LUU,TBR30LUU

Look at the left picture, you could understand well

Comparing to SBR and TBR, the main difference is that SBR block can just be mounted from up to down, But TBR block can be mounted from up to down, also down to up,SBR rail width is less than TBR rail width

However, SBR blocks and TBR blocks can be interchanged into the same linear guide, The rail linear shaft have 2 material:S45C and GCr15(SUJ2)

3,Products spections

Brand name ERSK
Product name Linear CZPT and block
Model no. SBR/TBR
Material quality chrome steel and stainless steel Aluminium alloy
Service after-sale service and technical assistance as per customer’s
requirement and needs. Customers are always given quickly
support.
Length Max:6000mm, other length as your requirement
Delivery time Base on customer required quantity,by negotiated
Products packing Plastic bag+box case or wooden case, or according to
customer’s requestment
Sample Sample order could be available
Payment terms T/t or L/C are available for large orders, Paypal and West
Union for small orders
Shipping method DHL,UPS,TNT,FEDEX,EMS,Airfreight and by sea, By
negotiated
Quality ISO9001-2008

Double linear bearings motion guide
Linear CZPT and block:
Description
Linear CZPT is consisted of rail, block, rolling elements, retainer, recirculator, seal etc. By using the rolling elements, such as balls or rollers between the rail and block, the linear CZPT can achieve high precision linear motion.
Linear CZPT block is divied to flange type and slim type without flange.or Seal type block, Standard type block, Double bearing type block, Short type block.  Also,linear block is divided to high load capacity with standard block lenth and ultra high load capacity with longer block length.

4,Let’s look at the details of the SBR and TBR series

linear bearing pillow block housing linear pillow block
Production according to customer’s request, block and rail assembled for the shipping.
Specification:
1,In stock
2,Performance: antifriction, interchangeable
3,Material: bearing steel GCr15
4,Rigidity:58-62
5,Application: CNC or automatic machinery
6,Length: can be cut to your requirement
7, Match: could match with ball screw in 1 machinery
 

5,SBR or TBR single shaft assembly includes:

1, Precision shafts made of different materials

2, Linear ball bushings for all performance levels

3, Linear slide bushings (ceramic/self lubricating)

4, Linear housings and components

5, Shaft support blocks and shaft support rails

6, Customer specific applications

6,If you want graphite copper sleeve into the aluminium housing, or the linear carriage with locking, We are CZPT to customize them for you.

Linear roundrails – classic components for reliable linear motion

Linear round rails are long established as machine elements for the execution of linear motions and have optimally withstood the test of time in industrial applications. They can be used for example as adjusting units in automation tasks.

Linear round rails are robust, reliable, powerful and – due to their simple construction – very economical. The construction of the round rails, which is based on hardened CZPT carriages in combination with different linear-motion bearings or linear-motion bushes, allows many possibilities for variation. Rodriguez also offers sliding bearing variants.

In addition to the type of bearing, there is also a broad spectrum of CZPT elements to choose from. Mounting the CZPT shaft on different shaft supports and the use of open CZPT elements create additional possibilities for variations. Linear roundtrails with shaft support provide an economical and robust alternative to profiled rail guides.

single Shaft Assembly (SBR or TBR series) is a complete assembly which simplifies the use of a linear bearing in a mechanical positioning application. Each assembly has a steel shaft mounted to a anodized, precision machined, aluminum support. The pre-drilled base mounting holes supports allow for easy customer mounting. The SBR or TBR assemblies come in standard lengths or customized length, and with shaft diameters from10mm to 50mm

7,Production Flow

Our Advantages

8,Our advantage

Advantages:
1, High rigidity and heavy load
2,Smooth running, low noise and non-pollution,high speed
3,High accurancy and easy setting up
4,Trial order is accpetable

Features:
Linear bearings and guides provide low friction, smooth, accurate motion for nearly any moment or normal loading condition.
1, Dynamic and static friction resistance difference is small, which is helpful to improve the response speed and sensitivity of CNC system
2,The driving power is small, which reduces the energy consumption
3,High positioning accuracy and repeat positioning accuracy
4,By increasing the preload, the rigidity is greatly enhanced
5,Using paired CZPT rails, it has the effect of homogenizing error
6,Can withstand the load from up and down or so
7,The end and the side can be manual or automatic lubricated through oil cup
8,It has simplified the desigh and manufacture of mechanical structure, therefore reduced the manufacturing cost
Application:
Linear bearing widely used in electronic equipment, tension tester and digital 3d
coordinate measurement equipment and other precision equipment, and multi-axis machine, punch, tool grinding machine, automatic cutting machine, printer,
card sorting machine installed the sliding parts such as industrial machinery. LCD manufacturing equipment, precise instruments, industrial robot, aerospace, medical and assistive and so on.
 

Related products

9,Our main products

There are many kinds of products we can offer, If you are interested in them, please click the picture and see the details.

Packaging & Shipping

10,Packaging and Shipping

Company Profile

11,Company information

12, Our principle:

Quality first, credibility is the key, the price followed

Our service

 

13,Our Service


Welcome to make inquiry!

Bearing:Linear Xihu (West Lake) Dis.way
(1).Acceptable price with good quality
(2).Prompt delivery and good service
(3).Low noise and long life
(4).The precision is international standard
(5We can make bearings in your drawings or samples,and if anything of interest
to you,please fell free to contact to me.Thanks!

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.
screwshaft

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are 2 types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The 2 types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are 2 types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in 2 stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to 6 times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.
screwshaft

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are 2 different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each 1 is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.
screwshaft

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the 2 materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

China factory Double Linear Bearings Motion CZPT   near me factory China factory Double Linear Bearings Motion CZPT   near me factory