Tag Archives: screw cnc

China high quality CZPT Ball Screw CNC Linear Guide Rails wheel and axle

Product Description

DETAILED PHOTOS

Product Description

 

Product Name Linear Xihu (West Lake) Dis. Rail / Linear Block
Width 15-35MM
Length 0-6000MM
Precision C/H/P
Type QEW-SA/QEW-CA
Size customize Size customize
Delivery Time Base on your required quantity,by negotiated
Application CNC machines,machine tools,Industrial Machinery,Pringting Machine,Paper-processing machine,automatic machines,textiles machines,electronic machinery,transport machinery,Robot,etc

Features
Low noise design
The synchronous coupling can be used to evenly arrange the balls at equal intervals. The metal impact between the balls and the balls disappears, and the sharp high-frequency sound intensity is effectively reduced. The combined noise intensity is effectively reduced by approximately 7.7 decibels in each speed range compared to the old series.
 
Self-lubricating design does not require oil
The synchronous coupling is designed with an oil storage space in the middle of the partition, which can supply the steel ball for lubrication during operation, and can uniformly replenish the lubricating oil in the oil storage space when passing through the direction turning portion, and continue to be evenly distributed. The steel balls are lubricated, so the frequency of replenishing the lubricant can be effectively reduced. After testing, high-performance lithium soap-based grease was added at the factory, and it can be used for more than 2,500 kilometers under the dynamic load rating of 0.2 times without fatigue damage. Therefore, high-performance grease is added at the time of shipment, and maintenance is required without normal maintenance under normal normal use.
 
Improve athletic smoothness
Conventional linear guides without synchronous couplings, when starting the operation, the steel balls on the load side will move first, and then push the steel balls in the direction of the rotating part and the unloaded side, causing a chain back and forth collision, causing the frictional resistance to fluctuate drastically. The Q1 Type linear CZPT with SynchMotion TM technology has all the steel balls in the same cycle connected in series because of the synchronous coupling. When the slider starts to move, all the steel balls start almost at the same time, and there is no collision between the steel balls. Under a certain degree of motion inertia, the range of variation of frictional resistance can be effectively reduced.
 
High speed design
The spacer design of the synchronous coupling can eliminate the mutual friction between the ball and the ball, and the design of HIWIN makes the ring wire contact between the ball and the synchronous coupling, which can reduce the contact area between the two, thereby effectively reducing friction. The resistance makes the SynchMotionTM silent linear guides have excellent high speed performance.
 

Specific parameters

Payment&Transport

Our Services

Company Profile

 

We are ZheJiang technology joint venture factory in China, professional manufacturer linear CZPT to global market with good quality and reasonable price. And our linear CZPT with ISO9001 & ISO14001 approved.

Our new factory around 45000 square meter put into production in 2015. Mainly products SHAC brand linear CZPT is interworking with HIWIN linear guide,ball screw parameter same as TBI ballscrew. We already export our products to some market such as USA,Europe, East Korea,South America, North America,Southeast Asia,Indian,etc.

FAQ

Application: CNC
Material: S55c/20crmo
Structure: Bearing
Installation: Automatic Machine
Driven Type: AC
Carrying Capacity: Weight Level
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

screwshaft

The Four Basic Components of a Screw Shaft

There are four basic components of a screw shaft: the Head, the Thread angle, and the Threaded shank. These components determine the length, shape, and quality of a screw. Understanding how these components work together can make purchasing screws easier. This article will cover these important factors and more. Once you know these, you can select the right type of screw for your project. If you need help choosing the correct type of screw, contact a qualified screw dealer.

Thread angle

The angle of a thread on a screw shaft is the difference between the two sides of the thread. Threads that are unified have a 60 degree angle. Screws have two parts: a major diameter, also known as the screw’s outside diameter, and a minor diameter, or the screw’s root diameter. A screw or nut has a major diameter and a minor diameter. Each has its own angle, but they all have one thing in common – the angle of thread is measured perpendicularly to the screw’s axis.
The pitch of a screw depends on the helix angle of the thread. In a single-start screw, the lead is equal to the pitch, and the thread angle of a multiple-start screw is based on the number of starts. Alternatively, you can use a square-threaded screw. Its square thread minimizes the contact surface between the nut and the screw, which improves efficiency and performance. A square thread requires fewer motors to transfer the same load, making it a good choice for heavy-duty applications.
A screw thread has four components. First, there is the pitch. This is the distance between the top and bottom surface of a nut. This is the distance the thread travels in a full revolution of the screw. Next, there is the pitch surface, which is the imaginary cylinder formed by the average of the crest and root height of each tooth. Next, there is the pitch angle, which is the angle between the pitch surface and the gear axis.

Head

There are three types of head for screws: flat, round, and hexagonal. They are used in industrial applications and have a flat outer face and a conical interior. Some varieties have a tamper-resistant pin in the head. These are usually used in the fabrication of bicycle parts. Some are lightweight, and can be easily carried from one place to another. This article will explain what each type of head is used for, and how to choose the right one for your screw.
The major diameter is the largest diameter of the thread. This is the distance between the crest and the root of the thread. The minor diameter is the smaller diameter and is the distance between the major and minor diameters. The minor diameter is half the major diameter. The major diameter is the upper surface of the thread. The minor diameter corresponds to the lower extreme of the thread. The thread angle is proportional to the distance between the major and minor diameters.
Lead screws are a more affordable option. They are easier to manufacture and less expensive than ball screws. They are also more efficient in vertical applications and low-speed operations. Some types of lead screws are also self-locking, and have a high coefficient of friction. Lead screws also have fewer parts. These types of screw shafts are available in various sizes and shapes. If you’re wondering which type of head of screw shaft to buy, this article is for you.

Threaded shank

Wood screws are made up of two parts: the head and the shank. The shank is not threaded all the way up. It is only partially threaded and contains the drive. This makes them less likely to overheat. Heads on wood screws include Oval, Round, Hex, Modified Truss, and Flat. Some of these are considered the “top” of the screw.
Screws come in many sizes and thread pitches. An M8 screw has a 1.25-mm thread pitch. The pitch indicates the distance between two identical threads. A pitch of one is greater than the other. The other is smaller and coarse. In most cases, the pitch of a screw is indicated by the letter M followed by the diameter in millimetres. Unless otherwise stated, the pitch of a screw is greater than its diameter.
Generally, the shank diameter is smaller than the head diameter. A nut with a drilled shank is commonly used. Moreover, a cotter pin nut is similar to a castle nut. Internal threads are usually created using a special tap for very hard metals. This tap must be followed by a regular tap. Slotted machine screws are usually sold packaged with nuts. Lastly, studs are often used in automotive and machine applications.
In general, screws with a metric thread are more difficult to install and remove. Fortunately, there are many different types of screw threads, which make replacing screws a breeze. In addition to these different sizes, many of these screws have safety wire holes to keep them from falling. These are just some of the differences between threaded screw and non-threaded. There are many different types of screw threads, and choosing the right one will depend on your needs and your budget.
screwshaft

Point

There are three types of screw heads with points: cone, oval, and half-dog. Each point is designed for a particular application, which determines its shape and tip. For screw applications, cone, oval, and half-dog points are common. Full dog points are not common, and they are available in a limited number of sizes and lengths. According to ASTM standards, point penetration contributes as much as 15% of the total holding power of the screw, but a cone-shaped point may be more preferred in some circumstances.
There are several types of set screws, each with its own advantage. Flat-head screws reduce indentation and frequent adjustment. Dog-point screws help maintain a secure grip by securing the collar to the screw shaft. Cup-point set screws, on the other hand, provide a slip-resistant connection. The diameter of a cup-point screw is usually half of its shaft diameter. If the screw is too small, it may slack and cause the screw collar to slip.
The UNF series has a larger area for tensile stress than coarse threads and is less prone to stripping. It’s used for external threads, limited engagement, and thinner walls. When using a UNF, always use a standard tap before a specialized tap. For example, a screw with a UNF point is the same size as a type C screw but with a shorter length.

Spacer

A spacer is an insulating material that sits between two parts and centers the shaft of a screw or other fastener. Spacers come in different sizes and shapes. Some of them are made of Teflon, which is thin and has a low coefficient of friction. Other materials used for spacers include steel, which is durable and works well in many applications. Plastic spacers are available in various thicknesses, ranging from 4.6 to 8 mm. They’re suitable for mounting gears and other items that require less contact surface.
These devices are used for precision fastening applications and are essential fastener accessories. They create clearance gaps between the two joined surfaces or components and enable the screw or bolt to be torqued correctly. Here’s a quick guide to help you choose the right spacer for the job. There are many different spacers available, and you should never be without one. All you need is a little research and common sense. And once you’re satisfied with your purchase, you can make a more informed decision.
A spacer is a component that allows the components to be spaced appropriately along a screw shaft. This tool is used to keep space between two objects, such as the spinning wheel and an adjacent metal structure. It also helps ensure that a competition game piece doesn’t rub against an adjacent metal structure. In addition to its common use, spacers can be used in many different situations. The next time you need a spacer, remember to check that the hole in your screw is threaded.
screwshaft

Nut

A nut is a simple device used to secure a screw shaft. The nut is fixed on each end of the screw shaft and rotates along its length. The nut is rotated by a motor, usually a stepper motor, which uses beam coupling to accommodate misalignments in the high-speed movement of the screw. Nuts are used to secure screw shafts to machined parts, and also to mount bearings on adapter sleeves and withdrawal sleeves.
There are several types of nut for screw shafts. Some have radial anti-backlash properties, which prevent unwanted radial clearances. In addition, they are designed to compensate for thread wear. Several nut styles are available, including anti-backlash radial nuts, which have a spring that pushes down on the nut’s flexible fingers. Axial anti-backlash nuts also provide thread-locking properties.
To install a ball nut, you must first align the tangs of the ball and nut. Then, you must place the adjusting nut on the shaft and tighten it against the spacer and spring washer. Then, you need to lubricate the threads, the ball grooves, and the spring washers. Once you’ve installed the nut, you can now install the ball screw assembly.
A nut for screw shaft can be made with either a ball or a socket. These types differ from hex nuts in that they don’t need end support bearings, and are rigidly mounted at the ends. These screws can also have internal cooling mechanisms to improve rigidity. In this way, they are easier to tension than rotating screws. You can also buy hollow stationary screws for rotator nut assemblies. This type is great for applications requiring high heat and wide temperature changes, but you should be sure to follow the manufacturer’s instructions.

China high quality CZPT Ball Screw CNC Linear Guide Rails   wheel and axleChina high quality CZPT Ball Screw CNC Linear Guide Rails   wheel and axle
editor by CX 2023-11-13

China Standard CNC Machining Carbon Steel Screw Thread Shaded Pole Motor Shaft shaft bolt broken

Solution Description

 

Merchandise Description

Organization kind Manufacturing facility/manufacturer

Support

CNC machining
Turning and milling
CNC turning
OEM components

Materials

(1) Aluminum:AL 6061-T6,6063,7075-T
(2)Stainless steel:303,304,316L,seventeen-4(SUS630)
(3)Steel:4140,Q235,Q345B,twenty#,45#
(4)Titanium:TA1,TA2/GR2,TA4/GR5,TC4,TC18
(5)Brass:C36000(HPb62),C37700(HPb59),C26800(H68)
(6)Copper, bronze, magnesium alloy, Delan, POM, acrylic, Laptop, and many others.
Support OEM/ODM avaliable

Complete

Sandblasting, anodizing, Blackenning, zinc/Nickl plating, Poland
Powder coating, passivation PVD plating titanium, electrogalvanization
Chrome plating, electrophoresis, QPQ
Electrochemical sprucing, chrome plating, knurling, laser etching Logo
Significant equipment CNC machining heart (milling device), CNC lathe, grinding device
Cylindrical grinding machine, drilling device, laser cutting equipment
Graphic format Stage, STP, GIS, CAD, PDF, DWG, DXF and other samples
Tolerance +/-.003mm
Surface area roughness Ra0.1~3.two
Inspection Complete screening laboratory with micrometer, optical comparator, caliper vernier, CMM
Depth caliper vernier, universal protractor, clock gauge, inside Celsius gauge

Thorough Photos

Solution Parameters

Material Offered
Aluminum Stainless Steel Brass Copper Plastic Iron
AL2571 SS201 C22000 C15710 POM Q235
ALA380 SS301 C24000 C11000 PEEK Q345B
AL5052 SS303 C26000 C12000 PVC 1214 / 1215
AL6061 SS304 C28000 C12200 Abdominal muscles forty five#
AL6063 SS316 C35600 and so forth. Nylon twenty#
AL6082 SS416 C36000   PP 4140 / 4130
AL7075 and many others. C37000   Delrin 12L14
and so on.   etc.   and so on. and so on.
Area Remedy
Aluminum Parts Stainless Metal Components Steel Parts Brass Parts
Very clear Anodized Polishing Zinc Plating Nickel Plating
Coloration Anodized Passivating Oxide black chrome plating
Sandblast Anodized Sandblasting Nickel Plating Electrophoresis black
Chemical Film Laser engraving Powder Coated Powder coated
Brushing Electrophoresis black Warmth treatment method Gold plating
Polishing Oxide black Chrome Plating etc.
Chroming etc and so forth  
etc      
TOLERANCE
The smallest tolerance can reach +/-.001mm or as per drawing request.
DRAWING Format
PFD Step Igs CAD Reliable and so forth

Packaging & Transport

Organization Profile

HangZhou Shinemotor Co.,Ltd located in HangZhou Town, ZheJiang Province of China.
Largely specializes in building, production and marketing all kinds of customized metallic and plastic parts.

Our manufacturing facility pass SGS, ISO9001/ ISO9001/ ISO14001 verification, areas can be commonly utilized in the fields of vehicle,
health care instruments, digital communications, industrial and buyer programs and so on.

We have introduced a sequence of superior and substantial performance production equipment imported from Japan and ZheJiang :
Large precision cnc lathes, 5/6 axis cnc machining centers, plane grinding & centerless grinding equipment,
stamping devices, wire cut devices, EDM and several other substantial-precision CNC equipment.
Our inspection tools contains: projector, 2nd, 2.5D, CMM, hardness screening device, device microscope, and so forth.

We focused to developing and producing types of brass, aluminum, metal, stainless steel
And plastic machining areas, stamping parts, and also CZPT design and producing.

We firmly hold the idea of  ” customer is the 1st, honesty is the simple, accrete win-win “. 
Focused to supplying you with higher-high quality products and superb service!
We sincerely appear ahead to creating a far better future by mutually helpful cooperation with you.
 

FAQ

one. Are you a manufacturing facility or a trading firm?

A: We are a manufacturing unit which has been specialized in cnc machining & computerized production for much more than 10 several years.

two. The place is your manufacturing facility and how can I go to it?
A: Our manufacturing facility is located in HangZhou metropolis and you can get a lot more detailed details by searching our web site.

3. How prolonged can I get some samples for checking and what about the price?
A: Usually samples will be done in 1-2 days (computerized machining elements) or 3-5 working day (cnc machining elements).
The sample cost depends on all details (dimension, content, complete, and so forth.).
We will return the sample price if your purchase quantity is good.

four. How is the guarantee of the merchandise high quality manage?
A: We hold the tightend quality controlling from quite begining to the conclude and intention at 100% mistake free of charge.

five.How to get an exact quotation?
♦ Drawings, images, comprehensive sizes or samples of goods.
♦ Content of merchandise.
♦ Common purchasing amount.
 Quotation inside 1~6 hrs

 

Shipping Cost:

Estimated freight per unit.



To be negotiated|


Freight Cost Calculator

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request